Safety Valve Calibration Stand (P/N: P1035)
Standards:
· API 526 · API 527 · API-576 · ANSI-NB-23
|
Application:
Safety valve calibration stand/safety relief valve test stand is designed for performance test on direct loaded or pilot operated safety valves, such as valves’set pressure, blow-down pressure, leakage and etc.
Technical Data:
· Test pressure: 0-70MPa
· Valve size: DN 10—DN600mm
· Valve Tyep: flange or threaded
· Test medium: Nitrogen, Air or Water (Optional)
· Test port: 1port
· Clamping Method: Hydraulic cylinder with 3claws station
· Pressure precision: 0.4 class pressure gauge (Optional )
· Pressure Transducer: ±0.5% accuracy
· Driven air: 6-8bar (workshop air)
· Power supply: 380V AC, 50Hz (Optional)
· Dimension: 1300×800×1200mm
|
 |
Features:
· Air-operated pump/booster as the pressure source, and the system equipping with a cylinder allows continuous test.
· User configuration on testing pressure and rate of pressure rise is allowed.
· Wide range of high pressure output.
· All high pressure valves, pump, tubing and fittings made in USA with 316SS guarantee the pressure precision and stability.
· Most of the liquid and gases medium are applicable.
· Emergency stop system protects operators and equipment to the utmost extent.
